View SBE805_1101825.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN7291
SBE805
Silicon Schottky Barrier Diode
SBE805
30V, 500mA Rectifier
Features
* * *
Package Dimensions
unit : mm 1294
[SBE805]
2.9 0.15
*
1
0.95
2
0.4
0.6
1.6
2.8
Low forward voltage (VF max=0.55V). Fast reverse recovery time (trr max=10ns). Composite type with 2 diodes contained in the CPH package currently in use, improving the mounting efficiency greatly. The chips incorporated are both equivalent to the SB05-03C.
5
4
3
0.6
0.05
1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode SANYO : CPH5
0.2
Specifications
Absolute Maximum Ratings at Ta=25C (Value per element)
Parameter Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions
0.4
0.7
0.9
Ratings 30 35 500 5 --55 to +125 --55 to +125
0.2
Unit V V mA A C C
Electrical Characteristics at Ta=25C (Value per element)
Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol VR VF IR C trr Rth(j-a) IR=150A IF=500mA VR=15V VR=10V, f=1MHz IF=IR=100mA, see specified Test Circuit. Conditions Ratings min 30 0.55 30 16 10 300 typ max Unit V V A pF ns C / W
Marking : SE
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O1002 TS IM TA-3609 No.7291-1/3
SBE805
Electrical Connection
5 4 3
trr Test Circuit
Duty10%
1
2
(Top view)
5V
100mA
1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode
100mA
10s
50
100
10
trr
2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 0 0.1 0.2
IF -- VF
2 1000 5
IR -- VR
Ta=125C
100C
Reverse Current, IR -- A
2 100 5 2 10 5 2 1.0 5 2 0.1 5 2
Forward Current, IF -- A
75C
125 C 75 C 25 C
50C
25C
--25 C
Ta=
0.3
0.4
0.5
0.6
0.7
0
5
10
15
20
25
30
10mA
35 ITR10728
Forward Voltage, VF -- V
2
ITR10727 7
C -- VR
Reverse Voltage, VR -- V
IS -- t
IS
f=1MHz
Surge Forward Current, IS(Peak) -- A Interterminal Capacitance, C -- pF
100 7 5 3 2
Current waveform 50Hz sine wave
6
5
20ms t
4
3
10 7 5 3 7
2
1 0
1.0
2
3
5
7
10
2
3
5
Reverse Voltage, VR -- V
100 ITR10729
7
7 0.01
2
3
5
7 0.1
2
3
5
7 1.0
2
3
Time, t -- s
ITR10730
No.7291-2/3
SBE805
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2002. Specifications and information herein are subject to change without notice.
PS No.7291-3/3

▲Up To Search▲

Price & Availability of SBE805

	To Download SBE805 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .